HIKVISION DS-PR1-60, User Manual, Page: 64 / 71

DS-PR1-60 User Manual
UM DS-PR1-60 090920NA 64
D.4 How To Raise the Camera Tracking Precision?
• Check if the speed dome initial position is set. If not, set the speed dome initial position.
• Check if the calibration points are correct. Pay attention to the situation that the target is intercepted when
calibrating. If the calibration points are in error, calibrate again.
• Check if the calibration positions are equally distributed when you set multi-point calibration.
• Do not move the speed dome manually after calibration. If the speed dome is manually moved, reset the
initial position of the speed dome and then calibrate again.
D.5 How to Solve No Reference Point on Frame While Setting Speed Dome Initial
Position?
If the speed dome is tilted, it may cause the reference point to be above the center of the frame or outside
the frame while setting the speed dome initial position. In this case, adjust the maximum elevation angle of
the speed dome as follows.
1. Enter the IP address of the speed dome in the Web browser to enter the Web client.
2. Click to expand the PTZ list on the Live View page, and then click to enter the main menu of the speed
dome.
Figure D-1 The Main Menu of Speed Dome
You can adjust the cursor for menu selection by clicking the up and down direction keys in
the PTZ list, and click to enter the selected item.
1. Adjust the cursor to System Settings in the main menu and click , then adjust the cursor to Motion and
click to enter the page.