Network Security Control Panel User Manual
55
1)
The control panel detects AC power supply status once in a while;
2)
The control panel detects storage battery status once in a while;
3)
The control panel detects tamper-proof status once in a while;
4)
The control panel detects ADSL cable status once in a while.
Q: The network is disconnected.
A
：
1)
Please check if the network status indicator of the board is normal on;
2)
If the network status indicator is not normal on, please check if the network cable
connection is normal.
Q: What if the client cannot log in the device?
A: Troubleshoot according to the prompt.
Please check if the device IP Address and Port No. are correct. The device default IP
Address is: 192.0.0.64, and the Port No. is: 8000.
Please check if the user name and password to log in the control panel are correct. The
default user name is: admin, the word is: 12345.
Q: Why the control panel cannot communicate with the alarm center group?
A: The configuration of control panel communicating with the alarm center group is as
follows:
1)
If the user communicates with the center via LAN: Configure parameters such as
monitoring IP, Port No., User Account and Communication Protocols of the remote
alarm center in Remote Configuration-> Others-> Network Center Configuration;
2)
If the user communicates via dialing: Configure parameters such as phone number,
receiver identity account and communication protocols of the remote alarm center
in Remote Configuration-> Others-> Dialing Parameter Setting;
3)
If the user communicates via Wi-Fi configure APN Name and Parameters of remote
alarm center in Remote Configuration-> Others-> WIFI Parameter Setting. The
parameters include monitoring IP, Port No., User Account and Communication
Protocol, etc.;
4)
After setting dialing parameters, LAN parameters and WIFI parameters, configure
the uploading mode in Remote Configuration-> Uploading Mode Configuration
Q: How to configure the communication way of control panel and alarm center group?
A:
1.
Center uploading mode supports at most 6 center groups, each center group divides in
main channel and 3 backup channels;
2.
If the center group is enabled. Enable the center group before the use.
3.
For example: The control panel needs to upload report to network alarm center 1 and
dialing alarm center1 and network alarm center 1 needs to upload report to network
alarm center 2 when it fails to upload it. The configurations are as follows:
1)
Enable Group1 and Group2;
2)
In the uploading mode configuration list, select N1 in center group 1 main channel,
Summary of Contents for DS-PK00 series
Page 63: ......