Network Security Control Panel User Manual
49
Working Status
Indicator Status
Working Status
Indicator Status
Enter programming
Green, Blink
Parameters
Initialization
Green, Blink
System Abnormal
Green, Blink
System Normal
Green, Normally On
Q: What are the steps of LED keypad to program the control panel
？
A
：
1.
In overall keypad programming mode, the program command is: {installer password} +
{*} + {0} + {#};
2.
To view the configuring operation for alarm control panel, please refer to alarm keypad
configuring code;
For example: program user password 2#, the password has arm/disarm function, does
not send arming report, does not allow bypass, password is 5678, and the program
code is shown as follow:
Command Code Arming Type Password End
{0}{0}{2} {3} {5}{6}{7}{8} {#}
3.
Set program command
There are 2 alert sound of correct or 5 alert sound of error and corresponding OSD
notices after each program command is over. When 5 alert sound of error is heard and
the screen displays Operation Failed, there is error in program command setting and
the user need to reset correct program command. When 2 alert sound of correct is
heard and the screen displays Operation Succeeded but the setting parameters are
not the parameters needed, you can operate according to program command once
again.
4.
Exit program mode, the program command is: {*} + {#}.
Q: What is the meaning of LED keypad Arm/Disarm, Operate, Camera indicators?
A:
LED alarm keypad Arm/Disarm indicator:
Working Status
Indicator Status
Working Status
Indicator Status
Armed
Red, Normally On
Enter Programming
Green, Blink
Disarmed
Green, Normally On
Main Operator
Change Password
Green, Blink
LED alarm keypad Operate indicator:
Working Status
Indicator Status
Working Status
Indicator Status
Normal
Green, Normally On
Keypad Not Logged In
Red, Blink
System Error
Orange, Blink
Enter Programming
Green, Blink
Project
Red, Normally On
Change Password
Green. Blink
Summary of Contents for DS-PK00 series
Page 63: ......