HIKVISION DS-PK00 series, User Manual, Page: 19 / 63

Network Security Control Panel User Manual
13
Work Test
001 002 003 004 005 006
System Fault Display Demonstration
The system fault display demonstration is shown below.
AC Power Off;
Low Battery Voltage;
Display Demonstration in Project Mode
The demonstration is shown below.
Network1: Connecting
…
Network1: Connected
Network1: Sending Report
…
Network1: Sending report
succeeded.
2.2.3 Buzzer Description
No.
Sound Prompt Description
1 One Beep
Pressing keys prompt; The command is timed out or
the command is too long.
2 Two Beeps Valid command. Uploading the report completed.
3 Five Beeps Invalid command. Failed to upload the report in 60s.
4
Continuous Beeping for
Two Seconds
Fault Prompt
5
Slowly Continuous
Beeps
Entry/Exit Delay
6
Rapidly Continuous
Beeps
Entry/Exit Delay, less than 10s.
7 Rapid Beeps Zone Alarm; The keyboard is not registered.