HIKVISION DS-PK00 series, User Manual, Page: 12 / 63

Network Security Control Panel User Manual
6

Interior Follower Zone
After arming the system, if the delayed Zone is first triggered, the
system will provide an entry delay when the interior follower zone is
triggered. If not, the interior follower zone will trigger alarm instantly.
The delay parameters of interior follower zone are the same with the e
delayed zone. It is mostly set in the rest room or hall (e.g. motion
detector), which is a key place to operate keyboard for users.

Key Arming/Disarming Zone
When the zone detects the output of detector event, the partition
arming will be triggered, while the recovery of detector event will
trigger disarming of the partition. This zone type will not be affected by
arming and disarming, and also can’t be bypassed. The zone can’t
display the alarm status, but can show fault status if the detector hasn’t
recovered after performing the disarming operation.
1.2.5 Relay

Definition
Relay refers to a programmable relay output of the security control panel, and a
connection between the security control panel and the follow-up output device.
By linking the relay, the security control panel can send the system event to the
cascading device, so as to connect the external light, or enable or disable other
devices.
1.2.6 User Operations

Arming
When the arming turns on, the intrusion detector starts work normally and turn
on the intrusion detection. The zones and loops that under the arming status are
detected in real time.. Once the resistance value exceeds the threshold, the alarm
starts.

Away Arming
When all the people in the detection area leave, turn on the Away Arming mode
to turn on all zones in the system after the defined dwell time.

Instant Arming
When all the people in the detection area leave, turn on the Instant Arming mode
to turn on all zones in the system instantly.

Stay Arming
The people stays inside the detection area, turn on the Stay Arming mode to turn
on all the perimeter burglary detection (such as perimeter detector, magnetic
contacts, curtain detector in the balcony), at the meanwhile, the detectors inside