HIKVISION DS-PK00 series, User Manual, Page: 20 / 63

Network Security Control Panel User Manual
14
No.
Sound Prompt Description
8
Three Long Beeps and
Two Short Beeps The tampering prevention of the keyboard is turned
on.
9 Three Beeps Registering the keyboard completed.
10
One Beep In Two
Seconds Two minutes before auto arming/disarming; One
minute before arming for temporary password.
11
Three Beeps In One
Second One minute before auto arming/disarming; 15s
before arming for temporary password.
2.3 Keypad Operation Code
Single Partition Mode
Default Status: the control is in the single partition mode, that is, only partition 1 is enabled.
Multi-Partitions Mode
1) In the multi-partitions mode (equal to or more than 2 partitions), there are 2
modes for keypad operations: global keypad mode, and partition keypad mode.

Global Keypad Mode: In this mode, the user does not enter the partition. The
object of keypad operation is the whole system of the control panel.

Partition Keypad Mode: In this mode, the user enters the partition. The object of
keypad operation is the partition that the user enters.

When initializing the device, the partition 1 is enabled and the global keypad
mode is disabled by default. The global keypad enters the partition mode, and
cannot be switched into the global mode. The system will enable the global mode
automatically unless the partition except for partition 1 is enabled.

The command for entering partition is “*3n#”, in which the range of n is from 1 to
8, standing 8 partitions.

The command for exiting partition is “*#”.
2) Only the administrator and the installer have the permission to operate the global
keypad. On the global keypad, the administrator can view and operate all partitions and the
whole control panel system.
3) When operating on the partition keypad, the administrator can only operate the
partition which the keypad belongs to.