Panic Alarm Station Configuration Guide
47
4. Click Save.
5. Optional: Click Refresh to refresh the camera status.
3.8.2 Set Video Parameters
Click
to enter the Remote Configuration page, go to CCD → Video Parameters.
Figure 3-42 Video Configuration Page
Select the camera from the drop-down box. Click Save.
3.8.3 Set WDR
When WDR is enabled, the device automatically balances the brightest and darkest parts of the
camera picture, improving the dynamic range of the overall picture to see more details of the
camera picture.
Steps
1. Click
to enter the Remote Configuration page, go to CCD → WDR.
Figure 3-43 WDR function Configuration
2. Select a camera, set Wide Dynamic Mode as Enable.
3. Set Wide Dynamic Level.
Note
The WDR level can change the wide dynamic strength.
4. Click Save to enable WDR.
