Panic Alarm Station Configuration Guide
20
Figure 3-14 Relay Configuration Page
Name
The relay name.
Output Delay(s)
The output delay time, can be set from 0 to 2000s. After the zone event is triggered, the relay
will turn off the relay output after the output delay time is ended.
3. Click Save.
4. Optional: Click Copy to..., you can copy the relay settings to other relays.
3.3.3 Set Call Waiting
Configure the call waiting parameters, include the maximum ring duration and waiting time.
Steps
1. Click
to enter the Remote Configuration page, go to Output Settings → Waiting.
Figure 3-15 Call Waiting Settings Page
2. Set the call waiting parameters.
Calling Duration
The playback time of the calling tone when calling, can be set from 40 s to 80 s.
Waiting Time
The extended playback time of the prompt tone based on the maximum ring time when
calling the master station and pressing the call waiting button, can be set from 10 seconds to
60 s.
3. Click Save.
