Panic Alarm Station Configuration Guide
15
Figure 3-9 Platform Access Configuration
2. Check Enable Platform Access to enable the Platform Access function.
3. Set the platform access parameters.
Access Type
Select the platform to be accessed.
Server IP or Domain Name
Enter the IP address or domain name of the platform.
Access to Server Port
Enter the port number of the platform.
Panel ID
Panel ID is the unique identification of the device.
Communication Network
Select the network mode for communication with platform.
Registration Status
Display the status which the device registers to the platform.
4. Click Save, and you can access to the device via platform.
3.2.8 Set Call Center Parameters
Steps
1. Click
to enter the Remote Configuration page, go to Network → Call Center Configuration.
