Panic Alarm Station Configuration Guide
8
4. Set the MTU(Byte), Device Port, HTTP port, RTSP port, and Default NIC for the device.
MTU(Byte)
Maximum transmission unit, which refers to the maximum packet size passed by TCP/UDP
protocol network transmission. The default is 1500.
Device Port
The default device port number is 8000.
HTTP port
The default port number is 8000, and it can be changed to any port No. which is not occupied.
RTSP port
The default port number is 554 and it can be changed to any port No. ranges from 1 to 65535.
Default Route
The default Route is NIC 1 and it can be set to NIC 1 or NIC 2.
5. Click Save to save the settings.
3.2.2 Set DNS
When the device accesses the network through the domain name, you need to configure the
correct and available DNS server IP address.
The device supports 2 DNS address.
Click
to enter the Remote Configuration page, go to Network → DNS, set the DNS server IP
address and click Save to save the settings.
Figure 3-3 DNS Setting Page
Note
When DHCP is enabled, the DNS cannot be set.
3.2.3 Set NAT
Enable the UPnP function, and you don't need to configure the port mapping for each port, and
