Panic Alarm Station Configuration Guide
10
Caution
Please do not arbitrarily edit the default port number. If there is a port conflict and you need
to edit the port number, please modify the port number as follows.
HTTP Port
By default, the value of the HTTP port No. is 80.
Server Port
By default, the value of the Server port No. is 8000. If the value is changed, you need to
enter the server port number on the login page when you log in the device by client
software.
RTSP Port
Real-time transport protocol port, please make sure that the port you modified is available.
By default, the value of the RTSP port No. is 554.
3. Click Save to save the settings.
3.2.4 Set Alarm Center
Configure the alarm center. When an alarm is triggered, the alarm information can be uploaded to
the configured alarm center.
Steps
1. Click
to enter the Remote Configuration page, go to Network → Network Center
Parameters.
Figure 3-5 Alarm Center Configuration
2. Select a NIC.
