manualshive.com logo in svg

HIKVISION DS-KD8003-IME2, Configuration Manual, Page: 46 / 51

Share
Download
HIKVISION DS-KD8003-IME2 Configuration Manual Download Page 46

Note

•

One video intercom device can only connect with one client software.

•

The maximum ring duration can be set from 15s to 60s via the Remote

Configuration of the video intercom device.

•

The maximum speaking duration between indoor station and iVMS-4200 can

be set from 120s to 600s via the Remote Configuration of indoor station.

•

The maximum speaking duration between door station and iVMS-4200 can

be set from 90s to 120s via the Remote Configuration of door station.

2.2.2 Live View via Door Station

You can get the live view of the main unit in the Main View module and control the

door station remotely.
In the Main View module, double-click a door station or drag the device to a display

window to start the live view.

Figure 2-2 Live View

Right click on the live view page, clickthe unlock iconto remote unlock the door.

2.2.3 View Call Logs

Before You Start

You can check all the call logs, including dialed call logs, received call logs and missed

call logs. You can also directly dial via the log list and clear the logs.

Module Door Station Configuration Guide

38

Summary of Contents for DS-KD8003-IME2




















































Reviews:

No comments