HIKVISION DS-KD8003-IME2, Configuration Manual, Page: 20 / 51

Steps
1. Click Access Control and Elevator to enter corresponding configuration page.
Figure 1-16 Access Control and Elevator
2. Set the Access Control parameters.
1) Select the door No.
2) Set the Door-unlocked Duration.
3) Optional: Enable Upload Alarm for Not-Closed Door.
4) Click Save to enable the settings.
Note
•
The door-unlocked duration ranges from 1 s to 255 s.
•
If you check Upload Alarm for Not-Closed Door, an alarm will be triggered
automatically if the door is not locked in the configured duration.
•
Enabling Card Encrypt, the door station can recognize the encrypted
information of the card when you swiping the card on the door station.
3. Set the Elevator Control parameters.
1) Select an elevator No., and select an elevator controller type for the elevator.
2) Set the negative floor.
Module Door Station Configuration Guide
12