manualshive.com logo in svg

HIKVISION DS-KD8003-IME2, Configuration Manual, Page: 12 / 51

Share
Download
HIKVISION DS-KD8003-IME2 Configuration Manual Download Page 12

Figure 1-6 Add to the Client

1.4 Reset Password

You can restore the default password or resetting the password for the door station.
Steps
1. Select the device from the online device list, click Reset Password. If the window

with import file button, key importing mode drop-down list, password and

confirm password field pops up.

2. Click Export to save the device file on your computer.
3. Send the file to our technical engineers.
4. Our technical engineer will send you a file to you. After receiving a file from the

technical engineer, select Import File from Key Importing Mode drop-down list

and click ... to import the file.

5. Input new password in text fields of Password and Confirm Password.
6. Click OK to reset the password.

Note

We highly recommend you to create a strong password of your own choosing

(using a minimum of 8 characters, including at least three kinds of following

categories: upper case letters, lower case letters, numbers, and special

Module Door Station Configuration Guide

4

Summary of Contents for DS-KD8003-IME2




















































Reviews:

No comments