manualshive.com logo in svg

HIKVISION DS-KD8003-IME2, Configuration Manual, Page: 44 / 51

Share
Download
HIKVISION DS-KD8003-IME2 Configuration Manual Download Page 44

2.1.3 Unlock Door

Unlock Door by Password

You can unlock the door by inputting the password via the keypad module.
Three formats of password are supported. They are:

•

【

#

】

+ Public Pa

【

#

】

•

【

#

】

+ Room No. + Pa

【

#

】

•

【

#

】

+ Room No. + Duress Pa

【

#

】

Note

•

Password contains 6 digits.

•

You're allowed to set 3 public passwords via iVMS-4200 client software.

•

The password varies according to different rooms.

Unlock Door by Card

Note

Make sure the card has been issued. You can issue the card via the door

station, or via iVMS-4200 client software.
Swipe the card on the card induction area to unlock the door.

Note

The main card does not support unlocking the door.

2.2 Video Intercom Operation via Client Software

The Video Intercom Management module provides the function of video intercom,

checking call logs and managing notice via the iVMS-4200 Client Software.

Note

For the user with access control module permissions, the user can enter the Access

Control module and manage video intercom and search information.

Module Door Station Configuration Guide

36

Summary of Contents for DS-KD8003-IME2




















































Reviews:

No comments