Fingerprint Time Attendance Terminal
76
2.
Select the host to be set from the host list.
3.
Click the
button to start setting the event linkage.
4.
Click the radio button of the event linkage, and select the event type from the
dropdown list.
5.
Set the linkage target, and set the property as
Trigger
to enable this function.
Host Buzzer
: The audible warning of controller will be triggered.
Snapshot
: The real-time capture will be triggered.
Reader Buzzer
: The audible warning of card reader will be triggered.
Alarm Output
: The alarm output will be triggered for notification.
Door
: The door status of open, close, normally open, and normally close will be
triggered.
6.
Click the
button to save parameters.
7.
Click the
Apply
button to download the updated parameters to the local memory
of the device.
Notes:
The door status of open, close, normally open, and normally close cannot be
triggered at the same time.
The attendance device does not support opening door, closing door and
capturing.
Card Linkage
In the Event Interact interface, the linkage alarm action, after triggering the card
number, can be set.
Steps:
1.
Click the Card Event Interact tab to enter the event card interface
2.
Select the host to be set from the host list.
3.
Click the
button to start setting the event linkage.
