HIKVISION DS-K1A340 Series User Manual Download Page 47

Page: 47 / 151

Note

●

The unit is min.

●

The available time is from 0 to 1440 min.

Set Normal Shift

Edit or add the normal shift attendance information, including the shift name, the shift period, and

the overtime shift period. You can also reset the normal shift after editing.
Before You Start

Set the attendance rule. For details, see Set Attendance Rule for Normal Shift .
Steps
1. Tap Local T&A → Shift Management → Normal Shift Management to enter the page.

Figure 7-9 Normal Shift Management

2. Select a shift from the list to enter the Shift Details page.

Note

By default, there are 3 configured normal shifts in the system.

3. Set the shift name and period in order and set the overtime shift period according to your

needs.

DS-K1A340 Series Face Recognition Terminal User Manual

Summary of Contents for DS-K1A340 Series
























































































































































Search results

Summary of Contents for DS-K1A340 Series

Reviews:

HIKVISION DS-K1A340 Series, User Manual, Page: 47 / 151

Search results

Summary of Contents for DS-K1A340 Series

Reviews: