manualshive.com logo in svg

HIKVISION DS-K1A340 Series, User Manual, Page: 45 / 151

Share
Download
HIKVISION DS-K1A340 Series User Manual Download Page 45

●

Normal Shift: It is applicable to the normal attendance situation. You can set the attendance rule

and the attendance checking times in the normal shift.

●

Man-Hour Shift: It is applicable to the situation with flexible working hours.

Note

Up to 256 shifts can be added.

Set Attendance Rule for Normal Shift

Set attendance rule before setting normal shift.
Tap Local T&A → Shift Management → Normal Shift Management → Attendance Rule to enter

the page.

Figure 7-7 Attendance Rule

Set the attendance rule, including Advanced Check In Time, Latest Check In Time, Absence Time

(Late), Earliest Check Out Time, Latest Check Out Time and Absence Time (Early Leave). After

entering the duration, tap OK to save the settings.
Take the following picture as an example to describe the rules.

DS-K1A340 Series Face Recognition Terminal User Manual

31

Summary of Contents for DS-K1A340 Series
























































































































































Reviews:

No comments