HIKVISION DS-8100HDI-S Series, User Manual

Page: 47 / 70

47
Configuring PTZ Cameras
Configuring Basic PTZ Settings
Settings for a PTZ camera must be configured before it can be used. Before proceeding, verify that the PTZ and RS-485 of
the DVR are connected properly.
To configure PTZ settings:
1.
Enter the PTZ Configuration menu, shown in Figure 42 by going to Main Menu > System Configuration > PTZ
Configuration.
Figure 39. PTZ Configuration Menu
2.
Select the
Serial Settings
tab.
3.
Select the camera to configure in the camera drop down menu on the upper left of the menu. If all cameras are to
be configured with the same settings, select
All Cameras
from the list
.
4.
Configure PTZ settings, including those of
Baud Rate
,
Data Bit
,
Stop Bit
,
Parity
,
Flow Ctrl
,
Protocol
and
Address
according to the parameters of the PTZ camera(s).
5.
Click the Save button to save current settings.