27
Configuring Live Feed Displays
Live Feed displays can be customized to your own needs. These settings can be accessed by entering the Display
Configuration menu, shown in Figure 19.
Figure 19. Display Configuration Menu
To customize display settings:
1.
Enter the Display Configuration menu by going to Main Menu > System Configuration > Display
Configuration.
2.
Select the
Video Output
to configure. You may configure either the VGA, Main CVBS or Spot CVBS.
3.
The settings available to configure for each video output includes:
•
Screen Configuration:
Screen configuration of each video output. You may select between a 1x1,
2x2 or 4x4 configuration.
•
Sequencing Dwell Time:
The time in seconds to
dwell
between switching of channels when Start
Sequence is selected in Live Feed. Selecting
Disable Switching
will disable switching in Live Feed.
•
Enable Audio:
Enables/disables audio output for the selected video output.
•
Output Format:
Designates the video output standard.
•
Device Name/No.:
Designates the device name and number of the current unit.
•
VGA Resolution:
Designates the resolution of main VGA display.
•
Mouse Pointer Speed:
Pointer speed of the mouse, the higher the amount, the faster the mouse
would move.
Summary of Contents for DS-8100HDI-S Series
