HIKVISION DS-8100-S Series User Manual Download Page 27

Page: 27 / 98

HIKVISION DS-8100-S User‟s Manual

Configuring Live Preview Displays

Live Preview displays can be customized to your own needs. These settings can be accessed by entering the Display
Settings menu.

Figure 4. Display Settings

To access the Display Settings menu:

Click the MENU button.

Click the Setting icon.

Click the Display icon.

The settings available in this menu include:

• Video Output:

Designates the output to configure the settings for. Outputs include Main Vout and

Auxiliary Vout.

• Mode:

Designates the display mode to be use for Live Preview (Spot out only one window).

• Dwell Time:

The time in seconds to

dwell

between switching of channels when

Start Sequence

selected in Live Preview.

• Camera Order:

The order of the cameras to be used in the selected display mode (See

Setting Camera

Order

• Enable Audio Output:

Enable/disable audio output for the selected video output.

• Event Output Port:

Designates the output to show event video on.

• Event Dwell Time:

The time in seconds to show event screen.

Note:

DVR will automatically detect if a VGA display is connected. If VGA is connected, main CVBS won‟t show

you any image. If VGA is not connected, main CVBS will show you main GUI.

Note:

Spot out only one window

Note:

VGA can‟t work together with Main CVBS

Summary of Contents for DS-8100-S Series



































































































Search results

Summary of Contents for DS-8100-S Series

Reviews:

Related manuals for DS-8100-S Series

Brands by name

Popular brands

HIKVISION DS-8100-S Series, User Manual

Search results

Summary of Contents for DS-8100-S Series

Reviews:

Related manuals for DS-8100-S Series

Brands by name

Popular brands