HIKVISION DS-7608NI-I2 User Manual Download

Page: 109 / 275

Network Video Recorder User Manual

108

6.1.6

Playing Back by Sub-periods

Purpose:

The video files can be played in multiple sub-periods simultaneously on the screens.

Steps:

Enter Playback interface.

Menu>Playback

Select

Sub-periods

from the drop-down list in the upper-left corner of the page to enter the Sub-periods

Playback interface.

Select a date and start playing the video file.

Select the Split-screen Number from the dropdown list. Up to 16 screens are configurable.

Figure 6. 16

Interface of Sub-periods Playback

According to the defined number of split-screens, the video files on the selected date can be divided into average

segments for playback. E.g., if there are video files existing between 16:00 and 22:00, and the 6-screen display

mode is selected, then it can play the video files for 1 hour on each screen simultaneously.

6.1.7

Playing Back by System Logs

Purpose:

Play back record file(s) associated with channels after searching system logs.

Steps:

Enter Log Information interface.

Menu>Maintenance>Log Information

Summary of Contents for DS-7608NI-I2




















































































































































































































































































Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands

HIKVISION DS-7608NI-I2, User Manual

Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands