HIKVISION DS-7608NI-I2 User Manual Download Page 156

Page: 156 / 275

Network Video Recorder User Manual

155

9.15

Sudden Scene Change Detection

Purpose:

Scene change detection function detects the change of surveillance environment affected by the external factors;

such as the intentional rotation of the camera, and some certain actions can be taken when the alarm is triggered.



Please refer to the

Chapter 9.2 Face Detection

for operating steps to configure the scene change detection.



The

Sensitivity

in the Rule Settings ranges from 1 to 100, and the higher the value is, the more easily the

change of scene can trigger the alarm.

9.16

Defocus Detection

Purpose:

The image blur caused by defocus of the lens can be detected, and some certain actions can be taken when the

alarm is triggered.



Please refer to the

Chapter 9.2 Face Detection

for operating steps to configure the defocus detection.



The

Sensitivity

in the Rule Settings ranges from 1 to 100, and the higher the value is, the more easily the

defocus image can trigger the alarm.

9.17

PIR Alarm

Purpose:

A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's field of view. The heat

energy dissipated by a person, or any other warm blooded creature such as dogs, cats, etc., can be detected.

Steps:

Enter the VCA settings interface.

Menu> Camera> VCA

Select the camera to configure the VCA.

You can click the checkbox of

Save VCA Picture

to save the captured pictures of VCA detection.

Select the VCA detection type to

PIR Alarm

Click

to configure the trigger channel, arming schedule and linkage action for the PIR alarm.

Click the

Rule Settings

button to set the rules. Please refer to the

Chapter 9.2 Face Detection

for

instructions.

Click

Apply

to activate the settings.

Summary of Contents for DS-7608NI-I2




















































































































































































































































































Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Brands by name

Popular brands

HIKVISION DS-7608NI-I2, User Manual

Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Brands by name

Popular brands