HIKVISION DS-7608NI-I2 User Manual Download

Page: 225 / 275

Network Video Recorder User Manual

224

Figure 15. 5

Export Log Files

Select the backup device from the dropdown list of

Device Name

Select the format of the log files to be exported. Up to 9 formats are selectable.

Click the

Export

to export the log files to the selected backup device.

You can click the

New Folder

button to create new folder in the backup device, or click the

Format

button

to format the backup device before log export.

Please connect the backup device to NVR before operating log export.

15.3

Importing/Exporting IP Camera Info

Purpose:

The information of added IP camera can be generated into an excel file and exported to the local device for backup,

including the IP address, manage port, password of admin, etc.. And the exported file can be edited on your PC,

like adding or deleting the content, and copy the setting to other devices by importing the excel file to it.

Steps:

Enter the camera management interface.

Menu > Camera > IP Camera Import/Export

Click the IP Camera Import/Export tab, the content of detected plugged external device appears.

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the importing process is completed, you must reboot the NVR.

Summary of Contents for DS-7608NI-I2




















































































































































































































































































Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands

HIKVISION DS-7608NI-I2, User Manual

Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands