HIKVISION DS-7608NI-I2 User Manual Download

Page: 170 / 275

Network Video Recorder User Manual

169

•

NO-IP:

Enter the account information in the corresponding fields. Refer to the DynDNS settings.

Enter

Server Address

for NO-IP.

In the

Device Domain Name

text field, enter the domain obtained from the NO-IP website

(www.no-ip.com).

Enter the

User Name

and

Password

registered in the NO-IP website.

Figure 11. 7

NO-IP Settings Interface

•

HiDDNS:

The

Server Address

of the HiDDNS server appears by default:

www.hik-online.com

Select your

Area/Country

in the dropdown list.

Enter the

Device Domain Name.

You can use the alias you registered in the HiDDNS server or

define a new device domain name. If a new alias of the device domain name is defined in the NVR,

it will replace the old one registered on the server. You can register the alias of the device domain

name in the HiDDNS server first and then enter the alias to the

Device Domain Name

in the NVR;

you can also enter the domain name directly on the NVR to create a new one.

Figure 11. 8

HiDDNS Settings Interface



Register the device on the HiDDNS server.

Go to the HiDDNS website:

www.hik-online.com

Summary of Contents for DS-7608NI-I2




















































































































































































































































































Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands

HIKVISION DS-7608NI-I2, User Manual

Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands