HIKVISION DS-7608NI-I2 User Manual Download Page 264

Page: 264 / 275

Network Video Recorder User Manual

263



Add the specifications of the new models (Chapter 17.1 Specifications)

Version 3.3.6

Added:



Add front panel and rear panel of DS-9600NI-I16. (Chapter 1.1 Front Panel and Chapter 1.5 Rear Panel)

Updated:



DS-9600NI-I16 supports RAID6, capture, picture playback, eSATA HDD and eSATA backup, two

self-adaptive 10M/100M/1000M network interfaces. (Product Main Features, 2.3 Using Wizard for Basic

Configuration, Chapter 5 Recording and Capture Settings, Chapter 6.1.9 Playing Back Pictures, Chapter 7

Backup, Chapter 11 Network Settings, Chapter 12 RAID, Chapter 17 Specifications)

Version 3.3.4

Added:



Add the new models of DS-7600NI-I2 (/P) and DS-7700NI-I4 (/P).



Add the support of Cloud P2P (Step 4 in Chapter 2.3 Using the Wizard for Basic Configuration, Chapter

11.2.2 Configuring EZVIZ Cloud P2P)

Summary of Contents for DS-7608NI-I2




















































































































































































































































































Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Brands by name

Popular brands

HIKVISION DS-7608NI-I2, User Manual

Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Brands by name

Popular brands