HIKVISION DS-7608NI-I2 User Manual Download

Page: 7 / 275

Network Video Recorder User Manual

Product Key Features

General



Connectable to network cameras, network dome and encoders.



Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,

PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt

ONVIF or PSIA protocol.



Connectable to the smart IP cameras.



H.265/H.264/MPEG4 video formats



PAL/NTSC adaptive video inputs.



Each channel supports dual-stream.



Up to 8/16/32/64 network cameras can be added according to different models.



Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.



The quality of the input and output record is configurable.

Local Monitoring



HDMI/VGA1 and HDMI2/VGA2 outputs provided for DS-9600NI and DS-8600NI series NVR.



HDMI and VGA outputs provided for DS-7600NI and DS-7700NI series NVR.



HDMI Video output at up to 4K resolution and VGA video output at up to 2K resolution.



Multiple screen display in live view is supported, and the display sequence of channels is adjustable.



Live view screen can be switched in group. Manual switch and auto-switch are provided and the

auto-switch interval is configurable.



Quick setting menu is provided for live view.



Motion detection, video tampering, video exception alert and video loss alert functions.



Privacy mask.



Multiple PTZ protocols supported; PTZ preset, patrol and pattern.



Zooming in by clicking the mouse and PTZ tracing by dragging mouse.

HDD Management



Up to 16 SATA hard disks and 1 eSATA disk can be connected for DS-9600NI-I16, up to 8 SATA hard

disks and 1 eSATA disk can be connected for DS-9600NI-I8 and DS-8600NI-K8, 4 SATA hard disks for

DS-7700NI, 2 SATA hard disks for DS-7600NI-I2/K2 (/P), and 1 SATA hard disk for DS-7600NI-K1 (/P)

series NVR.



Up to 6TB storage capacity for each disk supported.



Supports 8 network disks (NAS/IP SAN disk).



Supports S.M.A.R.T. and bad sector detection.



HDD group management.



Supports HDD standby function.



HDD property: redundancy, read-only, read/write (R/W).



HDD quota management; different capacity can be assigned to different channel.



For DS-9600NI-I8 and DS-9600NI-I16 series, RAID0, RAID1, RAID5, RAID6 and RAID 10 are

supported.

Hot-swappable RAID storage scheme, and can be enabled and disabled on your demand. And 16 arrays

can be configured.



DS-9600NI-I8 and DS-9600NI-I16 series NVR support disk clone to the eSATA disk.

Recording, Capture and Playback

Summary of Contents for DS-7608NI-I2




















































































































































































































































































Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands

HIKVISION DS-7608NI-I2, User Manual

Search results

Summary of Contents for DS-7608NI-I2

Reviews:

Related manuals for DS-7608NI-I2

Brands by name

Popular brands