HIKVISION DS-7604 Series User Manual Download Page 95

Page: 95 / 101

View System Log

Many events of your DVR are logged into the system log.
To access the system logs and search for these events:

Click Menu > Maintenance > Log Search to enter the Log Search menu, shown in Figure 15.

Figure15. Log Search Menu

Set search parameters.

Click the

Search

button to start search. If logs matching the search conditions are found, it will be

displayed in a list of search results as shown in Figure 16.

Figure16. Log Search Results

To view more detailed information about a particular log entry, select the log and click the

Details

button.

If applicable, you may also view the associated video to the selected log entry by clicking the

Play

button.

Log files can also be exported onto a USB device. To export a log file, connect a USB device to

the DVR, select the log file to export and click the

Export

button to enter the Log Search Export

menu, shown below in Figure 17. Click the

Export

button to export log onto USB device. The

exported file will be named according to the time it was exported (i.e. 2000062991627.txt).

www.cctvireland.ie

[email protected]

Summary of Contents for DS-7604 Series






































































































Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands

HIKVISION DS-7604 Series, User Manual

Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands