HIKVISION DS-7604 Series User Manual Download Page 66

Page: 66 / 101

Figure10. Host/Others Menu

Click

to save settings and exit the Host/Others menu.

Configuring Server and HTTP Ports

If you would like to change the server and HTTP ports from the default settings, you can do so in the Network
Settings menu. The default server port is 8000 while the default HTTP port is 80.

To change the default ports:

Click Menu > Settings > Network to enter the Network Settings menu.

Select the

Advanced

tab.

Click the

Set

button next to

Host/Others

to enter the Host/Others menu.

Enter new

Server Port

and

HTTP Port

, as shown in Figure 11.

Figure11. Host/Others Menu

Note:

The Server Port has a port range of 2000-65535 and is used for remote client software access. The HTTP

port is used for remote Internet browser access.

www.cctvireland.ie

[email protected]

Summary of Contents for DS-7604 Series






































































































Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands

HIKVISION DS-7604 Series, User Manual

Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands