HIKVISION DS-7604 Series User Manual Download Page 78

Page: 78 / 101

Figure8. Setting Mask Area

Select

to save settings and exit the

Mask Area

Settings interface.

Adjust Display Settings

Display settings such as the brightness, contrast, saturation and hue can also be adjusted in the Camera
Management menu.

To adjust display settings:

Click Menu > Settings > Camera to enter the Camera Settings menu, shown in Figure 1.

Select channel to adjust display settings under

Channel No.

, and click the Set button.

Note:

DS-7604NI-S/M, DS-7604NI-S and DS-7608NI-S models provide no analog camera

connection; please select IP cameras for configuration.

Select the

Advanced

tab to enter the Advanced Camera Settings menu, shown in Figure 9.

Click the

Set

button next to the Color Settings label.

Adjust the display settings, as shown in Figure 10. Brightness, contrast, saturation and hue can be

adjusted. The adjustments of display settings will affect the live images and the recorded images.

Figure 9. Display Settings

www.cctvireland.ie

[email protected]

Summary of Contents for DS-7604 Series






































































































Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands

HIKVISION DS-7604 Series, User Manual

Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands