HIKVISION DS-7604 Series User Manual Download Page 48

Page: 48 / 101

Note:

Video Player software will automatically be copied on to the device that the recorded files were exported

on.

To export recorded files via Event Search:

Enter the Event Search menu (shown in Figure 6) by clicking Menu > Event Search

Figure6. Event Search Menu

Set the search parameters by selecting event type to search, alarm input/ channel and the start/end

time , then click Search button, this will take you to search results interface.

Figure 7. Event Search Results

Select the files to export, you may also click the Play icon to verify that these files are indeed the

ones you would like to export.

Press Export button to enter Export menu, then you can export the files following the

step 6 to step 8 as above explanation in this chapter.

Export Video Clips

You may also select video clips to export directly in Playback status. A maximum of 30 clips can be selected for
each channel.

To export video clips during Playback:

www.cctvireland.ie

[email protected]

Summary of Contents for DS-7604 Series






































































































Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands

HIKVISION DS-7604 Series, User Manual

Search results

Summary of Contents for DS-7604 Series

Reviews:

Related manuals for DS-7604 Series

Brands by name

Popular brands