HIKVISION DS-7208HWI-SV series User Manual Download

Page: 22 / 241

User Manual of Digital Video Recorder

1.3

USB Mouse Operation

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB

mouse:

Plug USB mouse into one of the USB interfaces on the front panel of the device.

The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible

reason may be that the two devices are not compatible, please refer to the recommended device list from

your provider.

The operation of the mouse:

Table 1. 4

Description of the Mouse Control

Name

Action

Description

Left-Click

Single-Click

Live view: Select channel and show the quick set menu.

Menu: Select and enter.

Double-Click

Live view: Switch single-screen and multi-screen.

Click and Drag

PTZ control: pan, tilt and zoom.

Tamper-proof, privacy mask and motion detection: Select target area.

Digital zoom-in: Drag and select target area.

Live view: Drag channel/time bar.

Right-Click

Single-Click

Live view: Show menu.

Menu: Exit current menu to upper level menu.

Scroll-Wheel

Scrolling up

Live view: Previous screen.

Right-click Menu: Previous item.

Scrolling down

Live view: Next screen.

Right-click Menu: Next item.

Summary of Contents for DS-7208HWI-SV series


















































































































































































































































Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Related manuals for DS-7208HWI-SV series

Brands by name

Popular brands

HIKVISION DS-7208HWI-SV series, User Manual

Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Related manuals for DS-7208HWI-SV series

Brands by name

Popular brands