HIKVISION DS-7208HWI-SV series User Manual Download Page 200

Page: 200 / 241

User Manual of Digital Video Recorder

199

12.2

Configuring Privacy Mask

Purpose:

Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area

from being live viewed and recorded.

Steps:

Enter the Privacy Mask Settings interface.

Menu > Camera > Privacy Mask

Select the camera to set privacy mask.

Check

checkbox to enable privacy mask.

Figure 12. 3

Privacy Mask Settings Interface

Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.

Note:

Up to 4 privacy mask zones can be configured, and the size of each area can be adjusted.

The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear

Zone1-4 icons on the right side of the window, or click

Clear All

to clear all zones.

Figure 12. 4

Set Privacy Mask Area

You can click

Copy

to copy the privacy mask settings of the current camera to other cameras. Please refer to

step 7 of

Chapter 12.1 Configuring OSD Settings

Note:

Copying the privacy mask settings to network cameras is not available.

Click

Apply

to save the settings.

Summary of Contents for DS-7208HWI-SV series


















































































































































































































































Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7208HWI-SV series, User Manual

Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Brands by name

Popular brands