HIKVISION DS-7208HWI-SV series User Manual Download

Page: 135 / 241

User Manual of Digital Video Recorder

134

8.4

Detecting Video Tampering

Purpose:

Trigger alarm and take alarm response action(s) when the lens is covered.

Steps:

Enter Video Tampering interface and select a channel you want to detect video tampering.

Menu> Camera> Video Tampering

Figure 8. 16

Video Tampering Detection Settings Interface

Set the video tampering handling method of the channel.

Check

checkbox to enable detecting video tampering.

Drag the sensitivity bar and choose a proper sensitivity level. Use the mouse to draw an area you want

to detect video tampering.

Click

to configure the video tampering settings. Set arming schedule and alarm linkage actions of the

channel.

Click

Arming Schedule

tab to set the channel’s arming schedule.

Choose one day of a week and up to eight time periods can be set within each day. Set up arming

schedule of other days of a week. You can also click

Copy

to copy an arming schedule to other days.

Click

Apply

to save the settings.

Note:

Time periods cannot be repeated or overlapped.

Figure 8. 17

Set Arming Schedule of Video Tampering

Select

Linkage Action

tab to set alarm linkage actions of video tampering alarm. For details, see

Chapter

Summary of Contents for DS-7208HWI-SV series


















































































































































































































































Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Related manuals for DS-7208HWI-SV series

Brands by name

Popular brands

HIKVISION DS-7208HWI-SV series, User Manual

Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Related manuals for DS-7208HWI-SV series

Brands by name

Popular brands