HIKVISION DS-7208HWI-SV series User Manual Download

Page: 130 / 241

User Manual of Digital Video Recorder

129

8.2

Setting Sensor Alarms

Purpose:

You can set handling method of an external sensor alarm.

Note:

Sensor alarm is not supported by DS-7200HWI-SV series.

Steps:

Enter Alarm Settings interface and select an alarm input.

Menu> Configuration> Alarm

Figure 8. 8

Alarm Status Interface

Select

Alarm Input

tab to enter Alarm Input Settings interface, edit the name for the alarm input and set

the handling method of the selected alarm input.

Check

checkbox to enable the alarm input and click

to configure the alarm settings..

Figure 8. 9

Alarm

Input Settings Interface

Select

Trigger Channel

tab and select one or more channels which will start to record/capture or become

full-screen monitoring when an external alarm is input. Click

Apply

to save the settings.

Select

Arming Schedule

tab to set the channel’s arming schedule.

Choose one day of a week and up to eight time periods can be set within each day. Set up arming schedule

of other days of a week. You can also click

Copy

to copy an arming schedule to other days. Click

Apply

to save the settings.

Note:

Time periods cannot be repeated or overlapped.

Summary of Contents for DS-7208HWI-SV series


















































































































































































































































Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Related manuals for DS-7208HWI-SV series

Brands by name

Popular brands

HIKVISION DS-7208HWI-SV series, User Manual

Search results

Summary of Contents for DS-7208HWI-SV series

Reviews:

Related manuals for DS-7208HWI-SV series

Brands by name

Popular brands