HIKVISION DS-7104HVI-SH User Manual Download Page 112

Page: 112 / 158

User Manual of Digital Video Recorder

111

can refer to

Chapter 11.2.8

for the mapped HTTP port No.



OPTION 2: Access the devices via iVMS-4200

For iVMS-4200, in the Add Device window, select

and then edit the device

information.

Nickname

: Edit a name for the device as you want.

Server Address

: www.hik-online.com

Device Domain Name

: It refers to the

Device Domain Name

on the device or the

Device

Name

on the HiDDNS server you created

User Name

: Enter the user name of the device.

Password

: Enter the password of the device.

Figure 9. 12

Access Device via iVMS-4200

Click the

Apply

button to save and exit the interface.

9.2.2

Configuring PPPoE Settings

Purpose:

Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).

Steps:

Enter the

Network Settings

interface.

Menu >

Configuration

> Network

Select the

PPPoE

tab to enter the PPPoE Settings interface.

Figure 9. 13

PPPoE Settings Interface

Check the

PPPoE

checkbox to enable this feature.

Enter

User Name

and

Password

for PPPoE access.

The User Name and Password should be assigned by your ISP.

Summary of Contents for DS-7104HVI-SH































































































































































Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands

HIKVISION DS-7104HVI-SH, User Manual

Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands