HIKVISION DS-7104HVI-SH User Manual Download Page 35

Page: 35 / 158

User Manual of Digital Video Recorder

3.3

Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface,

dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3. 7

Live View-General

The settings available in this menu include:

Video Output Interface:

Select the output to configure the settings for. Two output interfaces are selectable:

VGA/HDMI and Main CVBS.

Live View Mode:

Select different window-division mode from the dropdown list.

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling auto-switch in Live

View.

Enable Audio Output:

Enable/disable audio output for the selected video output.

Event Output

: Select the output to show event video. Two output interfaces are selectable: VGA/HDMI and

Main CVBS.

Full Screen Monitoring Dwell Time

: The time in seconds to show alarm event screen.



When the HDMI/VGA output interface is used as the main video output and the

Audio Output

for the

HDMI/VGA output interface is enabled, the VGA audio and AUDIO OUT can be used for live view,

playback and two-way audio.



When the HDMI/VGA output is used as the main video output and the

Audio Output

for the

HDMI/VGA output interface is disabled, the VGA output provides no audio and the AUDIO OUT is

used for two-way audio.



When the CVBS output is used as the main video output, the HDMI/VGA audio is provided for Aux

video output in live view, and the AUDIO OUT is used as the main video output (for live view,

playback or two-way audio).



The DS-7100HWI/HVI-SL and DS-7200HI-SL models provide no HDMI interface.



The DS-7200HI-E1 does not provide the CVBS video output.

Setting Camera Order

Summary of Contents for DS-7104HVI-SH































































































































































Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Brands by name

Popular brands

HIKVISION DS-7104HVI-SH, User Manual

Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Brands by name

Popular brands