HIKVISION DS-7104HVI-SH User Manual Download Page 134

Page: 134 / 158

User Manual of Digital Video Recorder

133

11.1

Configuring OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc.

Steps:

Enter the OSD Configuration interface.

Menu > Camera > OSD

Select the camera to configure OSD settings.

Edit the Camera Name in the text field.

Configure the Display Name, Display Date and Display Week by clicking the checkbox.

Select the Date Format, Time Format and Display Mode.

Figure 11. 1

OSD Configuration Interface

You can use the mouse to click and drag the text frame on the preview window to adjust the OSD position.

Copy Camera Settings

If you want to copy the OSD settings of the current camera to other cameras, click the

Copy

button to

enter the Copy Camera interface.

Figure 11. 2

Copy Settings to Other Cameras

Select the camera (s) to be configured with the same OSD settings. You can also click the checkbox of

Analog to select all cameras.

Click the

button to finish the Copy settings and back to the OSD Configuration interface.

Click the

Apply

button to apply the settings.

You can also click the

Restore

to restore the current OSD settings to the default parameters.

11.1

Configuring Privacy Mask

Summary of Contents for DS-7104HVI-SH































































































































































Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands

HIKVISION DS-7104HVI-SH, User Manual

Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands