HIKVISION DS-7104HVI-SH User Manual Download Page 115

Page: 115 / 158

User Manual of Digital Video Recorder

114

You can click

Refresh

to get the latest status of the port mapping.

Figure 9. 18

UPnP™ Settings Finished

Click the

Apply

button to save the settings.

9.2.5

Configure More Settings

Steps:

Enter the Network Settings interface.

Menu >

Configuration

> Network

Select the

More Settings

tab to enter the More Settings interface.

Figure 9. 19

More Settings Interface

Configure the remote alarm host, server port, HTTP port, multicast, RTSP port or telnet.



Alarm Host IP/Port

: With a remote alarm host configured, the device will send the alarm event or

exception message to the host when an alarm is triggered. The remote alarm host must have the

CMS (Client Management System) software installed.

The

Alarm Host IP

refers to the IP address of the remote PC on which the CMS (Client

Management System) software (e.g., iVMS-4200) is installed, and the

Alarm Host Port

must be

the same as the alarm monitoring port configured in the software (default port is 7200).



Multicast IP

: The multicast can be configured to realize live view for more than the maximum

number of cameras through network. A multicast address spans the Class-D IP range of 224.0.0.0

to 239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to

239.255.255.255.

When adding a device to the CMS (Client Management System) software, the multicast address

must be the same as the device’s multicast IP.



RTSP Port

: The RTSP (Real Time Streaming Protocol) is

network control protocol designed for

use in entertainment and communications systems to control streaming media servers.

Enter the RTSP port in the text field of

RTSP Port

. The default RTSP port is 554, and you can

Summary of Contents for DS-7104HVI-SH































































































































































Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands

HIKVISION DS-7104HVI-SH, User Manual

Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands