HIKVISION DS-7104HVI-SH User Manual Download Page 117

Page: 117 / 158

User Manual of Digital Video Recorder

116

Figure 9. 21

Network Settings Interface

Click

the

Apply

button to save the settings.

Select the

Email

tab to enter the Email Settings interface.

Figure 9. 22

Email Settings Interface

Configure the following Email settings:

Enable Server Authentication (optional):

Check the checkbox to enable the server authentication

feature.

User Name

: The user account of sender’s Email for SMTP server authentication.

Password

: The password of sender’s Email for SMTP server authentication.

SMTP Server:

The SMTP Server IP address or host name (e.g., smtp.263xmail.com).

SMTP Port:

The SMTP port. The default TCP/IP port used for SMTP is 25.

Enable SSL (optional):

Click the checkbox to enable SSL if required by the SMTP server.

Sender:

The name of sender.

Sender’s Address:

The

Email address of sender.

Select Receivers:

Select the receiver. Up to 3 receivers can be configured.

Receiver:

The name of user to be notified.

Receiver’s Address:

The Email address of user to be notified.

Enable Attached Pictures:

Check the checkbox of

Enable Attached Picture

if you want to send

email with attached alarm images.

Summary of Contents for DS-7104HVI-SH































































































































































Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands

HIKVISION DS-7104HVI-SH, User Manual

Search results

Summary of Contents for DS-7104HVI-SH

Reviews:

Related manuals for DS-7104HVI-SH

Brands by name

Popular brands