Video Security Control Panel User Manual
--83--
The function of pacing is only available under the status of disarming and non-fault of the
zone. The system will do auto-arming in the pacing mode without reporting any CID log. The
siren will start warning after the alarm is triggered and stop warning if the alarm is dismissed.
If the zone is disarmed, it will exit the pacing mode automatically.
Control Panel Soft Recovery
3.2.24
For control panel soft recovery; see the command below:
{Master Code} + {*} + {6} + {8} + {#}
All unissued CID logs will not be reissued. Newly generated report will be issued after system
recovery.
The timer of the test report will not be cleared, and will remain the value before recovery till
the recovery processes being completed.
Current Fault Tone Disabling
3.2.25
To disable the current fault tone; see the command below:
{*} + {5} + {6} + {#}
If there are new faults, the prompt sound will re-Tip.
Test Report Manually Triggering
3.2.26
To trigger test report manually; see the command below:
{Password} + {*} + {6} + {1} + {#}
One operation generates one test report. It is used to test the communication between the security control panel
and center after installing the system or during the inspection.
Keypad Locking and Unlocking
3.2.27
If a user failed to operate for five times, the keypad will be locked for 30 seconds. During the lock duration, the
keypad backlight blinks and all of the key operations are invalid. The keypad will be unlocked after 30 seconds.