Video Security Control Panel User Manual
--103-
-
Remote Settings
->
Dialing Parameters
2.
Check the checkbox to enable report uploading.
3.
Enter the report uploading period (unit: hour). The report uploading period represents the time interval
between uploading the first report and the next report.
4.
Enter the first report uploading time interval (unit: minute). The first report uploading time interval
represents the time interval between enabling the report uploading function and sending the first report.
5.
Select a center type.
6.
Enter the center name and phone number.
The maximum length of center name is 32 characters.
The phone number should be 31 characters and the input mode is
{NO.}{Dwell Time}{EXT NO.}. For example, in the number of 000088075998FFF8180, the letter F
(which means 2 seconds) represents the dwell time, if the number of the letter F is N, the dwell
time is N*F seconds. The number of F is suggested to be more than 3, which means the dwell
time should be more than 6 seconds.
7.
Enter the dialing times (1~15). The dialing times represents the times that the control panel trying to
communicate the alarm receiving center.
8.
Select the Pstn protocol.
9.
Select the Pstn transmission mode: DTMF5/S and DTMF10/S.