HIKVISION DS-19A08-F/Kx, User Manual, Page: 74 / 157

Control Panel User Manual
74
No.1~No.8.
Command Command
Description
Command Command
Description
0 Disable 1 Enable
{11} End the command.
Prior Schedule Time Parameter Configuration
To configure the time parameters of the prior schedule, please refer to the
command below.
696 00 0 0 0 0 0 0 0 0 0 E #
1 2 4 6 3 5 8 7 9 10 11 12 13
{1} Prior Schedule Time Parameter Configuration Command Address:
696.
{2} It indicates the prior schedule number. 01~30 indicate prior
schedule No.1~No.30.
{3} It presents the time bucket composed by {4}~{11} . The value range
is 1~8.
{4}~{11} It indicates the start time and end time during the time bucket
of {3} .
Start Time: {4}{5}:{6}{7}
End Time: {8}{9}:{10}{11}

When you set the start and end time as 00:00 and 00:00, all the
settings from the present time bucket to the maximum time bucket
will be cleared.

When you set the start and end time as non-zero, the previous time
bucket must be non-zero.

When you set the start and end time as non-zero, only Arming in
{12} can be set.

When you set the start and end time as non-zero, end time must be
greater than start time in every time bucket.