HIKVISION DS-19A08-F/Kx, User Manual, Page: 50 / 157

Control Panel User Manual
50
531 2 0 000 #
1
4 2 3 5
{1} The programming command address of keypad user configuration
is 531
～
538.
{2} The configuration item of 2 indicates the keypad user
configuration.
{3} Add/Delete the user.
Command Command
Description
Command Command
Description
0 Delete 1 Add
{4} The user No.
{5} End the command

Added Separately : for instance, to add an user with the No. of 160 to the
No.8 partition, the command should be 538 2 1 160 #

Added/Deleted Continually : only continuous adding or deleting operation
is supported. After adding/deleting a user separately, enter the command
[P[User No.]+[#] to continually add/delete users. For instance, to
add users with the No. of 2,3,and 5, the command should be 538 2 1 002 #
Project # 003 # Project # 005 #.

Added/Delete in Batch : the formate is 531 2 x xxx xxx #.

Added with user No. interval : for instance, to add users with the No.
between 100~149 to the No.3 partition, the command should be
533.2.1.100.149 #.
Partition Zone Configuration
The programming command of zone configuration of the partition is shown
below.