HIKVISION DS-19A08-F/Kx, User Manual, Page: 107 / 157

Control Panel User Manual
107
6. Click each dropdown menu to configure the uploading channel.
7. Click Apply to save the settings.
The alarm channel of each center group should be configured in
order.
Network Center Configuration
Purpose:
In this section, you can configure the parameters(such as server type, IP address,
port No.,and so on)of the network center.
Steps:
1. Enter the network center configuration page.
Remote Configuration -> Network Center
2. Click and select a network center. Two centers are selectable.
3. Click the dropdown menu to select a sever type. Two sever types are
available: IP4/IP6 and domain.
4. Enter the IP address that is used to communicate with the network alarm