Hikari HK2900, Instruction Manual

Page: 82 / 195

1
No.
HK2900 Series
1 Application Bar tacking
、
sewing button
2 Sewing area
X (lateral) direction 40 mm Y (longitudinal) direction 30 mm
3 Maximum sewing speed 3000rpm. max, buttoning 2700rpm
4 Stitch length
0.1 to 10.0 mm (adjustable in 0.1 mm step)
5
Feed motion Intermittent feed (2 ‐ shaft drive by stepping motor)
Needle bar stroke 41.2mm
7 needle DP ×5 #14 (DP×5 #11(F,M), (DP×17#2 heavy fabric))
8 Presser foot lifter Pulse motor
9
Height of Presser foot 14mm standard, 17mm max.(when reverse and lift
the needle)
10 Standard pattern no. fifty
11
Wiper mode To work together with Work Clamp Foot driven by
Stepping Motor
12 Upper thread tension Thread clamp
13 Rotary hook Shuttle hook or shuttle hook 2
14 Lubricating mode Revolving part
：
micro ‐ lubrication
15 Engine oil Sewing engine oil
16 grease Grease for sewing machine
17 Data memory Flash Memory
18
Enlarging / Reducing facility
20% to 200% (1% step) in X direction and Y direction respectively
）
19
Enlarging / Reducing method
Pattern enlargement / reduction can be done by
increasing/decreasing the stitch length
20 Sewing speed 400 ‐ 3000rpm(100rpm unit)
21 Pattern selection Specific mode of pattern no.(1 ‐ 200)
22 Lower thread counter Up /down type(0 – 9999)
23 Mechanical motor 500W small AC servo motor(direct ‐ drive)
24 Overall dimensions 263mm×153mm×212mm
25 Control box weight approx.10 Kg
26 Power Consumption 600W
27 Temperature 5
℃
‐ 35
℃
28 Humidity 35% ‐ 85%
（
non ‐ condensing
）
29 Power supply voltage Single phase AC 220V ± 10%
；
50 ‐ 60Hz
[1] SPECIFICATION