Hikari HK2900, Instruction Manual

Page: 131 / 195

50
2 service parameters list
Parameter Function Setting range
Initial
Value
remarks
21. ‐‐
Standard pedal, clamp
switch position
50 ‐ 500 70
When the setting value is
increased, the amount of
pedal tread becomes
larger.
22. ‐‐
Standard pedal,2 ‐ step
stroke switch position
50 ‐ 500 120
When the setting value is
increased, the amount of
pedal tread becomes
larger.
23. ‐‐
Standard pedal, start
switch position
50 ‐ 500 185
When the setting value is
increased, the amount of
pedal tread becomes
larger.
24.0 Pedal type 0 or 1 0
0 single pedal
；
1 double
pedal
27. ‐‐
Clamp lowering speed
during pedal operation
100 ‐ 4000pps 4000
28. ‐‐
Clamp rising speed
during pedal operation
100 ‐ 4000pps 1500
Too much rise in the
setting level may result in
malfunction.
29. ‐‐
Thread trimmer clamp
rising speed at the end
of sewing
100 ‐ 4000pps 3000
Too much rise in the
setting level may result in
malfunction.
38. 0
Sewing is possible only
with the start switch,
without raising the work
clamp foot.
0
：
normal
1
：
work clamp foot
rise disabled
0
43. 1
Selection of sewing
machine rpm during
thread trimming
0
：
400rpm
1
：
800rpm
1
This is the sewing machine
rpm of the thread
spreading by moving knife,
when the sewing machine
has stopped, thread
trimmer is function.
44. 1
Selection of whether
the thread is moved in
0
：
feeding disabled
1
：
feeding enabled
1