HighLine RCH Hydro, Operator'S Manual

Page: 97 / 101

Section 7 - Troubleshooting
Symptom Problem Solution
Driveline bottoms out when
operating through deep
ditches Avoid these conditions
Bent or damaged output
shaft and/or bearings Replace shaft and oil seal
and bearings. Use Highline
parts
Driveline
Symptom Problem Solution
Telescoping Tube Fails Shock load Avoid solid objects
Collapsed beyond allowed
angle Avoid such conditions
Set the drawbar to the
proper length
Replace driveline
Insufficient Greasing If the grease point in the
telescoping section is not
accessible when connected
to the tractor, disconnect
from the tractor and extend
the PTO shaft to access the
grease point
Yoke or cross fails Lack of lubrication Apply grease
Shock load Avoid solid objects
PTO Driveline Bent Contact with the drawbar Reposition drawbar. Refer
to “transporting the mower”
section
Driveline too long, bottoms
out when operating through
deep ditches Avoid these conditions
Page 7-14