HighLine RCH Hydro, Operator'S Manual

Page: 54 / 101

Section 4 - Operating the Mower
9. Move the wing blade pans switches up
(light on) on the control box to have the
wing blades operating.
10. Operate the PTO at the rated PTO
speed to engage the hydraulic pump
to turn the center and wing blade
pans.
Do not operate within 300 ft
(100m) of any person. Thrown
objects can cause serious injury
or death.
11. Allow the wings to float.
- Fully extend the wing lift cylinders.
This will allow the wings to follow the
contour of uneven ground.
- If a wing seems to lower, re-phase the
wing height cylinders by fully raising
the mower. Hold the lever open for at
least 30 seconds or until the cylinders
are fully synchronized.
12. Avoid cutting into the ditch.
- On uneven areas, prevent the blades
from cutting into gravel or dirt by
positioning a support wheel near the
highest point.
Control Box (Joystick Option Shown)
216010
Allow the Wings to Float
214112
Mower Deck On Uneven Area
107075C
Page 4-11