HighLine RCH Hydro, Operator'S Manual

Page: 66 / 101

Section 5 - Maintaining the Mower
Annually
!
Grease the blade hub on the center deck
and both wing decks.
- The grease point (1) is accessed by
reaching between the blade pan and
the deck.
Note: It is not necessary to remove
the blade pan to grease the
hubs.
- There is a grease fitting on the hub
body.
- Fill with grease until grease comes out
the fitting which is on the hub on the
top side of the deck.
Alternate Method:
- Remove the four bolts (2) holding the
motor.
- Lift the motor.
- Check that the grease is at the level of
the breather.
- If grease is needed, add a semi-fluid
NLGI #00 EP lithium grease to the
level of the breather.
Grease Blade Hub
(Pan Shown Removed for Clarity)
214059C
Hub on Deck
214060C
Page 5-7